激光光散射研究丙烯酰胺-二甲基二烯丙基氯化铵共聚物的溶液行为

用激光光散射技术表征了阳离子含量受控的丙烯酰胺 二甲基二烯丙基氯化铵共聚物 (简称P(AM DMDAAC) )在 0 1mol LNaCl溶液中的基本参数和溶液行为 .表观基本参数 : Mw ,app =5 0 4× 10 5g·mol- 1 、app =39 9nm和A2 ,APP =1 5× 10 - 4cm3·mol·g- 2 .动态光散射研究结果表明 ,扩散系数Dt 与角度、浓度皆呈非线性依赖关系 ,当C >C 或在较大的散射角域 ,Dt 偏离线性关系所预示的理论值而向减小的方向发展 ,表明存在缔合物 ;流体力学半径Rh 分布有大、小两个范围 ,并随温度升高向小尺寸方向发展 ,证明了体系中存在缔合行为以及升温的解缔合作用 .在一定条件下 ,“亚稳定性”的存在有力地旁证了体系的缔合行为     

YDHC-10催化剂用于不饱和植物油脂肪酸氢化工艺条件的研究

采用自制的催化剂YDHC-10对氢化工艺条件进行了研究。找出了植物油脂肪酸氢化时,氢化压力2MPa、氢化温度180-200℃、氢化时间60min以及催化剂浓度对植物油脂肪酸氢化的影响．     

硫代乙酰胺体系电沉积法制备CdS纳米膜

The film of surface active agents spread out on the surface of the electrolyte of Thioacetamide and cadmium chloride. CdS nanofilm was deposited at the interface of surface active agents and electrolyt by the method of electrodeposition. The optimal conditions on which the nanofilm was prepared of the least crystals and uniform particles could be attained via analytical results of L₁₆(4⁵) orthogonal experiments. The optimal conditions: castor oil/hexadecanoll 0.06 mL·cm^-2，CdCl₂/CH₃CSNH₂ 4 mmol·L^-1, cell voltage 5 V, electrodeposition temperature 15 ℃. The effects on the grain size of temperature, surface-active agent, electrodyte concentration, cell voltage and pH become smaller in the series. If the temperature was high, the movement of molecules of surface-active agent and electrodyte would be faster, thus the preparation of the film would be difficult. The grain size of thinfilm varied with the surface-active agents, however, when the amount of surface-active agents reached a certain value, the grain size would remain unchanged. The higher the electrodyte concentration, the larger the grain size of nanofilm. The surface forms were changed at the same time. If the pH of the electrodyte was higher or lower, nanofilm could not be prepared successfully, thus the pH range should be is 3～6. SEM image of the nanofilm shows the occurance of dendrite. The sucessful preparation of nanofilm is closely related to the nature of surface activre agent due to the nanofilm growth mechanism.     

含羟基芳基或氨基芳基的磷酰胺酯衍生物的合成

采用均相反应的方法合成了6个含羟基芳基或氨基芳基的磷酰胺酯衍生物:[(ClCH_2CH_2)_2NP(O)(OPh)(XArY)](X:O,NH;Y:m或p-OH或NH_2).用元素分析、红外光谱、氢核磁共振谱及质谱证实了它们的组成及结构.     

顶空-气相色谱法进展

回顾了顶空采样气相色谱分析法在复杂基质中挥发性成分中的应用．总结并详述了顶空分析的三种重要模式-介绍了顶空分析的相关原理和整个顶空分析系统的参数优化过程．综述了顶空．气相色谱分析在生物样本中挥发性有机物的测定、药品中有机残留溶剂的检测、聚合材料中挥发性有机物的分析、环境中有害的有机挥发性物质分析、挥发油分析和烟草分析等方面的进展．     

微乳液体系中过硫酸钾氧化碘离子的动力学研究

分别在不同盐浓度的自由水和不同液滴尺寸的微乳液中测量了过硫酸钾氧化碘 离子的化学反应速率常数，获得微乳液不核中水的活度，探讨了水的活度及体系中 离子强度与反应速率的关系，发现当表面活性剂与水的摩尔比R≤20时，水的活度 随微反应器尺寸减小而快速下降。     

DL－苹果酸－丙酮－BrO~3^-－Mn^2^+－H~2SO~4化学振荡 反应诱导期的新特征 及其动力学研究

在前文研究工作的基础上,较详细地研究了DL-苹果酸(以下简称DL-MA)、丙酮(以下简称Act)参与下的新型化学振荡反应及各种影响因素,对各主要参与反应物质在诱导期中的作用、起振原因、诱导期的新特征和可能反应机理进行了较为深入的研究,分别获得DL-MA,KBrO~3,MnSO~4的浓度对诱导期影响的拟合方程。以及诱导期的表观活化参数为E~I~N=68.50kJ·mol^-^1。     

Pressure Effects on Thermodynamics of Phase Behavior in Polystyrene/Methylcyclohexane Solutions

The calculations presented in this paper are based on the Sanchez-Lacombe(SL)lattice fluid theory.The interaction energy parameter,g12/k,required in this approach was obtained by fitting the cloud points of polystyrene(PS)/methylcyclohexane(MCH)polymer solutions under pressure.The SL lattice fluid theory was used to calculate the spinodals,the binodals,and the Flory-Huggins(FH)interaction parameter of the solutions.The calculated results show that the SL lattice fluid theory can describe the dependences of thermodynamics of PS/MCH solutions on temperature and pressure very well.However,the calculated enthalpy and the excess volume changes indicate that the Clausius-Clapeyron equation cannot be suitable to describe pressure effect on PS/MCH solutions.Further analysis on the thermodynamics of this system under pressure shows that the role of entropy is more important than the excess volume in the present case.     

带有可调通道的嵌段共聚物胶束对药物的控制释放

用聚丙烯酸叔丁酯-b-聚乙二醇(PtBA45-b-PEG114)和聚丙烯酸叔丁酯-b-聚4-乙烯基吡啶(PtBA60-b-P4VP80)制备了复合胶束. 该胶束在pH=2.5的酸性水溶液中形成以PtBA为核, PEG和P4VP为壳的稳定球型结构. 在pH=12时, 壳层的P4VP链段变为疏水, 塌缩在PtBA的核上形成内壳, PEG链段继续保持溶解状态, 与成核的PtBA连接并穿过塌陷的P4VP内壳, 形成胶束的冠, 由于PEG处于溶解状态, 其分子链间有比较大的空隙, 可以控制一些小分子通过, 在胶束的表面形成通道. 该通道类似于生物膜的蛋白通道, 可以控制PtBA核与外界进行能量或物质交换的速度. 以布洛芬为模型分子, 负载在胶束内进行药物控制释放研究的结果表明, 胶束表面的通道可以起到明显控制布洛芬释放速度的作用, 并且药物的释放速度与通道在胶束表面的比例成正比.     

超临界CO2法制备头孢唑啉钠脂质体

采用超临界CO2(scCO2)流体代替有机溶剂一步法制备了头孢唑啉钠药物载体脂质体. 研究了该脂质体的尺寸、稳定性和药物的包封率. 结果表明, 脂质体的尺寸和稳定性依赖于制备压力, 脂质体对头孢唑啉钠的包封率与乙醇和脂浓度有关, 采用超临界CO2法制备脂质体的药物包封率比采用薄膜分散法(Bangham method)制备的包封率高.